Yandex IoT Core pricing
Written by
Updated at March 29, 2024
What is included in the Yandex IoT Core cost
In Yandex IoT Core, you are charged for the number of messages. The message count is rounded up using the following formula:
Message Count = Command Size / 1 KB
For example:
- If the command size is 800 B, it is a single message.
- If the command size is 2,800 B (2.73 KB), it is three messages.
The first 100000 messages each month are free of charge.
After you've used up your free service amounts, you will be charged at the applicable rate. The unused balance of free services is reset at the end of the month.
Example of cost calculation
Calculation of the cost of usage for Yandex IoT Core if during a month:
- 2,000,000 commands were sent.
- The size of each command was 1,500 B.
(1,500 / 1,024) × 2,000,000
4,000,000 messages were sent in total.
According to the pricing policy:
- 100,000 messages are free of charge.
- 900,000 messages are rated at $0.923076 per million messages.
- 3,000,000 messages are rated at $0.833333 per million messages.
The cost is calculated as follows:
900,000/1,000,000 × $0.923076 + 3,000,000/1,000,000 × $0.833333
Total: $3.330767
Payable commands
MQTT
List of commands charged under Yandex IoT Core:
CONNECT
: Connect a client (device or registry) to the MQTT server of the service.PUBLISH
: Send a message from the client (device or registry) to the MQTT server of the service.SUBSCRIBE
: Subscribe the client (device or registry) to messages from the MQTT server of the service.PUBLISH
: Send a message from the MQTT server of the service to the client (device or registry).PINGREQ
: Check the connection from the client (device or registry) to the MQTT server of the service.
Pricing
Amount of data
Resource category | Cost of 1 million, without VAT |
---|---|
100000 messages or less per month | Free of charge |
Message count, up to 1 million | $0.923076 |
Message count, from 1 million to 5 million | $0.833333 |
Message count, 5 million or more | $0.743589 |